Advertisement
Quick Links
DWR Wood Headboard and
Platform Frame Assembly
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
1 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S
For care instructions, please visit
dwr.com/learn.
Advertisement
Related Manuals for Design Within Reach DWR
Summary of Contents for Design Within Reach DWR
- Page 1 DWR Wood Headboard and Platform Frame Assembly Customer Service: For care instructions, please visit 1.800.944.2233 inside the U.S. 1.203.614.0600 outside the U.S. dwr.com/learn. 1 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
- Page 2 DWR Wood Headboard and Platform Frame Assembly READ BEFORE BEGINNING ASSEMBLY Please identify all parts and have the required hardware before you begin. Read all instructions before assembly. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a clean and flat soft surface to prevent scratching during assembly.
- Page 3 DWR Wood Headboard and Platform Frame Assembly Platform Frame Hardware List Short Bolt x 18 Medium Bolt Long Bolt 1/4" diameter 1/4" diameter 1/4" diameter 3/4" length 1-3/16" length 2-3/8" length Twin and Full x 26 Twin x 8 Queen and King x 28...
- Page 4 DWR Wood Headboard and Platform Frame Assembly Screw cam lock pegs into footboard, and tighten fully with Phillips screwdriver. Insert cam lock heads into side rail with screwdriver receptacle facing out. Line up pegs in footboard with matching holes in side rails, and push ends together until flush. Turn cam lock heads with screwdriver until secure.
- Page 5 DWR Wood Headboard and Platform Frame Assembly Attach footboard leg to footboard using 4 long bolts, 4 spring washers, and 4 small flat washers. Tighten fully with Allen wrench. Repeat on other side. Attach center rail legs to center rail (all excluded from twin size)l using 1 long bolt, 1 spring washer, and 1 small flat washer for each leg.
- Page 6 DWR Wood Headboard and Platform Frame Assembly For safety, make sure headboard is being held by another person or leaning securely against a wall. Rest center rail in headboard support block. Attach center rail to support block using 1 long bolt, 1 spring washer, and 1 small flat washer.
Need help?
Do you have a question about the DWR and is the answer not in the manual?
Questions and answers