Table of Contents
Advertisement
Quick Links
Line Storage Bed
Designed by Nathan Yong for Design Within Reach
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
1 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S
Wood Care
Dust with a slightly damp, soft,
lint-free cloth. Wipe dry with a
dry, soft cloth in the direction of
the wood grain. Do not use aerosol
cleaners or polishes. Also, do not
use polishes containing waxes
or abrasives, or polishes that are
oil-based.
Advertisement
Table of Contents
Related Manuals for Design Within Reach Line Storage Bed
Summary of Contents for Design Within Reach Line Storage Bed
- Page 1 Line Storage Bed Designed by Nathan Yong for Design Within Reach Wood Care Dust with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft cloth in the direction of the wood grain. Do not use aerosol cleaners or polishes. Also, do not...
- Page 2 Line Storage Bed Hardware Checklist SHORT BOLT X 84 MEDIUM BOLT X 18 LONG BOLT X 1 (M6 X 30MM) (M6 X 35MM) (M6 X 50MM) SMALL ALLEN WRENCH X 1 LARGE ALLEN WRENCH X 1 SPANNER WRENCH X 1...
- Page 3 Line Storage Bed Parts Checklist HEADBOARD X 1 FOOTBOARD/DRAWER ASSEMBLY X 1 SIDE RAIL X 2 CENTER RAIL X 1 SLAT X 42 CENTER LEG X 1 3 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
- Page 4 Line Storage Bed Drawer Adjustments Underside of drawer HOW TO RELEASE DRAWER SLIDES Squeeze both handles at front underside of drawer and firmly pull drawer forward. HOW TO REINSTALL DRAWER Fully extend drawer slides and place drawer box on top of slides. Pull each drawer slide forward until it locks into both left and right side clips.
- Page 5 Line Storage Bed Position drawer assembly near bed’s final location, then remove drawers and set aside. Attach one side rail, as shown, using four medium bolts. Thread all bolts loosely at first, then tighten with small Allen wrench. Repeat with opposite side rail.
- Page 6 Line Storage Bed Attach L-brackets to headboard and footboard using insert screws, as shown. Attach center leg to center rail with one long bolt. Tighten with small Allen wrench. 6 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
- Page 7 Line Storage Bed Position center rail as shown and attach to L-brackets on headboard and footboard using insert screws. Thread all screws loosely at first, then tighten with small Allen wrench. Use spanner and large Allen wrench to level bed with seven adjustable feet, including on center leg.
- Page 8 Line Storage Bed Attach slats using 84 short bolts. Thread all bolts loosely at first, then tighten with small Allen wrench or electric drill fitted with a hex bit. Extend slides and reinstall drawers. 8 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
Need help?
Do you have a question about the Line Storage Bed and is the answer not in the manual?
Questions and answers