Table of Contents
Advertisement
Quick Links
Raleigh Bed
Designed by Jeffrey Bernett, Nicholas Dodziuk
and Christopher Skodi
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
1 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S
Wood Care
Dust frequently with a damp cloth,
then immediately wipe dry. Never
use solvents, harsh chemicals
or abrasives on any finishes. Clean
as necessary with a clean cloth
and a solution of cool water and
mild detergent.
Fabric Care
Vacuum regularly to remove dust.
Spot clean with a solution of cool
water and mild detergent. Never use
solvents of any kind.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Design Within Reach Raleigh Bed
Summary of Contents for Design Within Reach Raleigh Bed
- Page 1 Raleigh Bed Designed by Jeffrey Bernett, Nicholas Dodziuk and Christopher Skodi Wood Care Dust frequently with a damp cloth, then immediately wipe dry. Never use solvents, harsh chemicals or abrasives on any finishes. Clean as necessary with a clean cloth and a solution of cool water and mild detergent.
- Page 2 Raleigh Bed Hardware Checklist 2 X THREADED RODS 2 X HEX NUTS 6 X LONG BOLTS 6 X SHORT BOLTS 30 X WOOD SCREWS FOR FULL 32 X WOOD SCREWS FOR QUEEN OR KING 34 X WOOD SCREWS FOR CAL. KING...
- Page 3 Raleigh Bed Attach side rails to headboard rail using four long bolts. 4 X LONG BOLTS Attach footboard to side rails using two long bolts. 2 X LONG BOLTS 3 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
- Page 4 Raleigh Bed Install two threaded rods into headboard legs as shown, then attach headboard by pushing threaded rods through side rails and securing with two hex nuts. Tighten with flat wrench. 2 X THREADED RODS 2 X HEX NUTS FLAT WRENCH Attach legs to center rail, then connect to headboard and footboard using two short bolts.
- Page 5 Raleigh Bed Attach one cushion by aligning clip on back and pins on bottom with corresponding parts on bed frame. Push cushion toward center of frame to lock in place, then secure with two short bolts. 2 X SHORT BOLTS...
- Page 6 Raleigh Bed Repeat with second cushion. First cushion must be completely installed before installing second cushion. 2 X SHORT BOLTS Lay slats in place as shown and secure with wood screws using an electric drill. 2 X WOOD SCREWS ELECTRIC DRILL IN EACH SLAT 6 | W W W.
Need help?
Do you have a question about the Raleigh Bed and is the answer not in the manual?
Questions and answers