Advertisement
Loop Collection
Designed by Earnest Studio for Design Within Reach
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0750 outside the U.S.
SIX-DRAWER DRESSER
For use on Wide Dresser and Three-Drawer Dresser. Comes in its
SAFETY STRAP KIT
own included package.
Short screw x 2
1 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S
Long screw x 2
Safety strap x 1
THREE-DRAWER DRESSER
Bracket x 2
TOOLS (NOT INCLUDED)
Phillips screwdriver
BESIDE TABLE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Design Within Reach Loop Dresser 100172177
Summary of Contents for Design Within Reach Loop Dresser 100172177
- Page 1 Loop Collection Designed by Earnest Studio for Design Within Reach Customer Service: 1.800.944.2233 inside the U.S. 1.203.614.0750 outside the U.S. SIX-DRAWER DRESSER THREE-DRAWER DRESSER BESIDE TABLE For use on Wide Dresser and Three-Drawer Dresser. Comes in its SAFETY STRAP KIT TOOLS (NOT INCLUDED) own included package.
- Page 2 Loop Collection Cabinet is packed with sheet of MDF attached to base with leveling feet. To remove, lay cabinet on back and remove leveling feet by turning counterclockwise. After removing MDF sheet, return leveling feet to legs. With cabinet in final location, check for level from side to side and front to back. Adjust leveling feet, as shown, until cabinet is level in all directions. LOWER RAISE 2 | W W W.
- Page 3 Loop Collection Drawer pulls are factory installed facing inward for shipping. Remove each with a screwdriver, then reinstall facing outward. 3 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
- Page 4 Loop Collection To raise or lower drawer, locate knobs next to latch pins on each sllide. Turn knobs to adjust height of drawer. 4 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
- Page 5 Loop Collection Safety strap kit, included with your dresser in its own package, must be installed on the Six-Drawer Dresser and Three-Drawer Dresser. Follow instructions with kit. Wall Safety strap kit Safety strap kit is not required on Bedside Table. 5 | W W W.
- Page 6 Loop Collection NOTE: To remove drawer, pull all the way out. Reach under drawer and locate downward protruding latch pins on drawer slides, one on each side, as shown below. Push both pins inward toward center of drawer to release drawer from slide. Drawer can now be lifted off slides. Reverse process to reinstall. 6 | W W W.
Need help?
Do you have a question about the Loop Dresser 100172177 and is the answer not in the manual?
Questions and answers