Advertisement
NOTICE
Product intended to be assembled by an adult due to the presence of small parts.
Screws must be tightened and fully inserted into the frame. To achieve this we recommend holding the longer side of the hexa-
gonal key supplied and apply pressure.
USE AND MAINTENANCE
Clean metal parts of the product using a soft cloth moistened with a solution of water and mild soap; wipe dry immediately
using a soft dry cloth. Furniture cleaning products may also be used.
The colour of parts may change with exposure to direct sunlight. Do not use acids, solvents or abrasive products.
Fabric parts are removable, maintenance information on the care label.
CARE LABEL "OXY-FR" FABRIC
40
light washing
temperature
40° MAX
To remove the fabric cover, turn the headboard over and lift and pull velcro straps.
ASSEMBLY INSTRUCTIONS
MIN UPHOLSTERED HEADBOARD
(composition 100% PL-FR)
P
dry clean
"A" x 1
headboard
do not
do not
bleach
tumbler dry
design Luciano Bertoncini
"B" x 2
upper bracket
"C" x 2
under bracket
"D" x 2
M8x20 hexagon head screw
"E" x 2
washers
"F" x 1
hexagonal key
iron with
low temperature
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Design Within Reach MIN
Summary of Contents for Design Within Reach MIN
- Page 1 ASSEMBLY INSTRUCTIONS MIN UPHOLSTERED HEADBOARD design Luciano Bertoncini “B” x 2 upper bracket “C” x 2 under bracket “A” x 1 headboard “D” x 2 M8x20 hexagon head screw “E” x 2 washers “F” x 1 hexagonal key NOTICE Product intended to be assembled by an adult due to the presence of small parts.
- Page 2 Center upper brackets B along frame and correctly position the distance so that the tubular supports on headboard A are aligned and can be inserted. Insert the under brackets C with the washers E and with the screws D as shown in the figure. Do not tighten screws completely.
Need help?
Do you have a question about the MIN and is the answer not in the manual?
Questions and answers