Confirming Timer Programmes; Cancelling Timer Programmes - Sharp VC-H726X Operation Manual

Recording with the Timer
Confirming Timer Programmes
You can see on the On Screen Display a list of all timer programmes that aie already set.
PREPARATION
• Turn on your TV and VCR and select the video channel on the TV,
TIMER
o *
[Example]
i/3
nxrit Fit HTAJ1T STOP
T V
3/a
T r
CfctAlt 1 CAUCUS.
a ViaBLLC7
UETlBlJTEU HBNU i EXIT
—
, A , SET
o
o
Press
TIMER. (If
VCR is in timer standby mode and the
"Q"
Indicator is lit, cancel the timer standby mode by
pressing
TIMER ON/OFF
and then turn on the power.)
The screen for confirming programmes that have been
set will appear.
• Check the information displayed,
• If
you want to correct the data, select the programme to
be changed with
A/T
and then press
SET.
Correct the
setting as described on pages 25 and 26.
4 Normal
\^)
t Screen
© To return to the normal screen, press
MENU.
• After checking or correcting the programme contents,
press
TIMER ON/OFF
to enter the Timer Standby
mode.
Cancelling Timer Programmes
Perform the following procedure to cancel timer programmes that have already been set.
PREPARATION
• Turn on your TV and VCR and select the video channel on the TV.
TIMER
DATE Pit START 3T0P
mien v
o *
TV
2/2
T T
CIjEMU CXWCEI.
A Ti SELECT
6ET1ENTER KEIfR * EXIT
▲
or
▼
CLEAR
o >
•-/.. ~
▼ T 2/2 T V
CLEAR* CANCEL
A T j SEXjECT
RET t ENTER KE1ID * EXIT
MENU
o ♦
Normal
Screen
Press
TIMER.
(If VCR is in timer standby mode and the
"ET indicator is lit, cancel the timer standby mode by
pressing
TIMER ON/OFF
and then turn on the power.)
The screen for confirming timer recording programmes
that have been set will appear.
• Select the programme number you wish to cancel with
±/T. (The selected programme will appear
highlighted.)
© Double-check that it is the programme you wish to
cancel, and press
CLEAR.
It will be cleared on the
screen.
© To return to the normal screen, press
MENU.
• If there are still some programmes set, press
TIMER
ON/OFF
to enter the Timer Standby mode.
27