Connecting To A Stereo Tv; Connecting To Tv And Audio Equipment - Sharp VC-H726X Operation Manual

0 Disconnecting TV Cable
Disconnect the aerial cabie from the back of your TV set.
0 Connecting Aerial Cabie to VCR
Connect the aerial cable to the
ANTENNA IN
terminal of your VCR.
0 Connecting VCR to TV
Connect the supplied coaxial cable to the
RF
OUT
terminal of the VCR. Plug the other end into
your TV's
ANTENNA IN
terminal.
K1 Connecting to a Stereo TV
I NOTE >
• Stereo sound output is only possible using the AUDIO OUT terminals. Sound from the radio frequency converter (RF OUT) is
mono only.
• The power cord should not be plugged into the power outlet until the above connections have been completed.
• if TV reception is weak, use a TV signal booster (not supplied).
Connecting to TV and Audio Equipment
From VIDEO OUT
To AUDIO INR/L
From RF OUT
From AUDIO OUT R/L
To ANTENNA
IN
To VIDEO IN
8