Table of Contents
Advertisement
This VCR automatically records audio signals on two kinds of audio tracks.
Hi-Fi:
Using specialized rotary heads, audio signals are recorded on the video track in the FM format.
Multi channel broadcasts (stereo or bilingual programmes) are automatically recorded on two tracks.
Normal: Audio signals are recorded monaurally on the linear track. Stereo broadcasts are recorded in mono and only
the main audio track of bilingual programmes is recorded.
I NOTE >
• Video cassettes recorded on a non-Hi-Fi VCR can also be played back. However, if the audio signals are recorded on two
linear channels, stereo programmes will be played back monaurally and bilingual programmes will be played back with both
the main and sub audio tracks mixed together.
• Video cassettes recorded on this VCR can be played back on a non-Hi-Fi VCR. However, only the norma! (linear) track will
be played back.
Switching Input Signals
Various sources of video and audio signals can be recorded as shown in the following chart.
(a) Selecting a channel will record both video and audio from the VCR tuner.
(b) Selecting an external source position will record both video and audio from an external source via the back-panel
AUDIO/VIDEO LINE 1 or front LINE IN 2 terminal. (To select an external source position, press
INPUT SELECT
or
select a channel situated between the last channel and the first channel with
CHANNEL A/Y)._
Input mode
TV screen
Signals Recorded
Video track
Normal audio track
Hi-Fi audio track
Tuner
2
1
Signals from tuner
Signals from AUDIO/VIDEO (LINE1) terminal on the rear of the VCR
External 2
(LINE 2)
L2
1
Signals from LINE IN 2 terminal on the front of the VCR
I NOTE >
* This VCR can record NTSC signals through AV Input terminals.
Recording Audio Only
This VCR can record Hi-Fi audio-only signals.
Q Connect the audio source (CD player, etc.) to the AUDIO-IN L/R terminals on the front or rear of the VCR.
© Select the connected external position LINE IN 1 or 2 ("LI" or "L2" lights up) by pressing
INPUT SELECT
or
CHANNEL
A/Y.
© Press
TAPE SPEED
on the remote control to select SP, LP or EP mode.
© Press
REC.
I NOTE >
• When playing back an audio-only tape with this VCR using the speakers of a connected TV to listen to the sound, make sure
that the TV does not mute the sound when receiving the audio-only signal. If this should happen, output the audio to a
separate audio system.
Advertisement
Table of Contents
