Table of Contents
Advertisement
CONSECUTIVE
PHOTOGRAPHY
(Motes on Self-Timer and Dual-Frame
Self-Timer:
* To cancel the self-timer after it has been started,
press the main switch. In this instance, the power
Is not switched off.
* When combined with ( B), {
) or (<*>
), the
shutter will be released in approx. 1/2 sec.
* When using flash, make sure the flash is charged
(the red lamp lights up} before operating either timer
feature.
* When the battery symbol {<i
I) appears on the
LCD panel, the camera may not operate. If this
occurs, replace the batteries (see page 41).
Press the drive button until the ( gii ) symbol
appears on the LCD panel. While the shutter release
button is held down, a frame is shot every 1.6 sec.
Moving subjects such as a running person, etc., can
be shot. The camera focuses on the subjects frame
by frame in this mode, so make sure to keep the
autofocus frame on the subject.
Note:
• When using flash in this mode, consecutive
shooting is possible only after the flash is charged
(the red lamp lights up) following each exposure.
Advertisement
Table of Contents
