AUTO FLASH PHOTOGRAPHY
1. If additional light is required, the Built-in Flash
automatically activates.
* Recommended Flash Shooting Range (ISO
100) 1.2m-about3.7m (3.9ft-12ft).
2. When the flash is recharged and full, the Ready
Monitor lights up. (Fig. 9) Then, press the
Shutter Release Button to take a flash
photograph.
* When the flash is fully charged, the Ready
Monitor will be turned off after approx. 45 sec.
The Ready Monitor lights again to tell you that
the flash Is ready when pressing the Shutter
Release Button halfway.
* When the flash is used, it will take about 8
seconds to charge the flash fully.
* As soon as the recycle time of flash charge
exceeds 20 sec, it means that the batteries are
near exhausted and should be replaced by
fresh ones immediately.
RED EYE REDUCTION
This camera is designed to activate Red-eye
Reduction automatically. This makes it possible to
minimize the red-eye effect that sometimes occurs
when taking portrait photographs with flash. Now
it's easy for anyone to take superior shots of
people.
Press the Release smoothly to half way and hold
there for at least one second to turn the Red-eye
LED, then press all the way down to take a
picture.
10