Interval Shooting - Pentax ZOOM 90-WR Operating Manual

Hide thumbs Also See for ZOOM 90-WR:
Table of Contents

Advertisement

INTERVAL SHOOTING
Press
the
drive
button until the (INT)
mark appears on the
LCD
panel.
This
mode allows you to
shoot
with
an
interval
selectable
between 10 seconds and 1 hour. It is ideal for
observational photography of animals, insects or
plants, etc.
[Example: 10S=10sec. 60M = 60min.]
The selectable shooting intervals are 10, 20, 30, 40,
50, and 60 seconds and 2, 3, 4, 5, 10, 20, 30, 40,
50, 60 minutes.
To select the shooting interval, press either zooming
button while pressing the drive button until the
required interval time appears on the LCD panel. The
preset interval time is 60 seconds. (When the zooming
button is kept depressed, the interval time will be fast
forwarded.)
(0) Pressed to advance to the 60 minutes setting.
(@)> Pressed to decrease to the 10 seconds setting.
After the selection, press the shutter release button;
the first frame will be exposed 3 seconds later. Then
the rest of the film will be automatically exposed
according to the interval time selected.
Notes:
• When in the Interval Shooting mode, the interval
shooting mark (INT) blinks on the LCD panel and
the remaining time of the interval is also displayed.
• To cancel the Interval Shooting mode after it has
been activated, press the main switch. In this
instance, the power is not switched off.
• jhe exposure counter indication appears on the
LCD panel when the shutter release button is
pressed halfway.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zoom 90-wr date

Table of Contents