Table of Contents
Advertisement
Replacing the battery for data Imprinting
section
The imprinting section is powered by one CR2025 3V
Lithium battery. When the displays in the LCD cannot
be seen clearly or when the watch function becomes
unstable, replace the battery with a new one. The
battery will last for about 3 years.
* Make sure that no film is loaded by checking the
film information window, before opening the back
cover.
1. Loosen the two battery cover fixing screws with
a Phillips screwdriver, and then remove the battery
chamber cover.
2. Replace the old battery with a new battery with
the + side facing up.
3. Reinstall the battery chamber cover, and tighten
the two battery cover fixing screws.
* When the battery is set correctly, Data will be
displayed- Reset the data according to "Correcting
the date and time" after replacing the battery.
* Keep the battery out of reach of children, infants
and pets.
Advertisement
Table of Contents
