Table of Contents
Advertisement
SELF-TIMER PHOTOGRAPHY
Self-Timer
Use the self-timer if you wish to get in the pic-
ture. Use of a tripod is recommended.
1 Set the main/drive switch to (©).
2 Assure that the subject is within the AF
frame in the viewfinder. Depress the shut-
ter release button fully.
The shutter will be released in about 10 sec-
onds. When the self-timer is working, the Self-
Timer lamp blinks 3 seconds before the shutter
is released.
|
Sa
To cancel
To stop the self-timer operation at any time after
its been activated, set the main/drive switch to
the other position.
*Do not stand directly in front of the camera
when starting the Self-Timer, as the camera
will focus on you, not the main subject. Be sure
that you are behind, or next to the camera
when starting the Self-Timer.
* When you want to use the flash with the self-
timer, ensure that the red flash-ready lamp is lit
before starting the self-timer.
33
Advertisement
Table of Contents
