Section V - Accessories - Keithley 600A Instruction Manual

AccEssoRm
MODEL 600~ ELET'ROEEim
SECTION V - ACCESSORIES
MODEL 6lOl.A Sl-IIEZOEIC TEZ LEAlk
The Model 6101A Lead consists of an input connector, 3 feet of
low noise cable and a shielded probe head. Its purpose is to
allow convenient connection to the electrometer input.
MODEL 61OZA - 1O:l VOLWGE-DIVIDER PIiOBE:
The Model 6102A divider probe is intended for general purpose
measurements where an extension of the upper voltage range of
the 600A is desired. The division ratio is 1O:l correct to 1%
and the probe input resistance
is lOlo ohms. The probe is
supplied with a mating connector and 3 feet of cable.
MODEL 6103A Y 1ooO:1VOL!IWE-DIVIDEB PFiOBE:
The Model 6103A probe is intended for very high voltage measure-
ments at high impedance. The division rat& is 1OOO:l correct
to 3% and the probe input resistance is 10
ohms. The probe
is supplied with a mating connector and 3 feet of cable.
MODEL 61OL TEST SHIELD:
The Model 61Oh Test Shield is intended for use in making measure-
ments wherein complete shielding of the component under test is
required. External terminals are provided for either grounded
tests, or a test requiring an external voltage source.
5-l