Panasonic DoubleFeature PV-D4753S Operating Instructions Manual page 56

;heck the following points if you are having trouble with your DECK.
No power...
Power turns itself off...
I:T_"_ _lf'_X,,_l,_l_"_ _
I
TV program cannot be recorded...
Completely insert Power Plug into an AC outlet.
Set POWER button to on.
Make sure power source is active.
• Auto power-off (shutoff) occurs after about 5 rain.
in DVD mode with no operation, or if there is no
broadcast signal in TV or Playback mode.
Turn the power back on. (pp. 23, 33)
• Check connections between DECK, external
antenna, and TV.
• Check channel selections.
• Make sure your antenna system (CABLE or TV) is
correctly set. (Channels [p. 18])
• Make sure cassette record tab is intact. (p. 6)
Timer recording cannot be • Confirm that clock is set to current time and date.
performed... • Make sure Cable/DSS box (if used) is left on and
tuned to channe] to be recorded.
• Set recording start/stop times correctly. (p. 24)
• Timer recording may not be performed or continued
if a power interruption occurs before or during a
Timer Recording, even after power is restored.
There is no playback picture, or the • Select channel 3 or 4 on TV to match VCR output
playback picture is noisy or contains channel (3 or 4) (p. 16) or select LINE.
streaks... • Set VCR/TV selector to "VCR."
• Adjust TRACKING control in either direction. (p. 6)
• Try Head Cleaning. (p. 6)
During special effects playback, • Set TV's Vertical Hold Control to MANUAL, then
picture may contain some vertical adjust.
jitter when using a TV with an
Automatic Vertical Hold Control...
DECK cannot be controlled... • Make sure DECK power is on.
• Check Remote batteries.
• Make sure VCR LOCK is set to off. (p. 33)
• Make sure Remote is in proper mode. (p. 28)
• Make sure Timer Recording is not in progress.
I_e,_l [o_
DECK cannot be remote controlled...
• Make sure DECK power is on.
• Make sure Remote is in VCR mode.
• Aim Remote Control direly at remote sensor on DECK. (p.9)
• Avoid any object blocking signal path.
• Check Remote batteries. (p. 4)
• Exposing DECK remote sensor to direct fluorescent
or outdoor light may cause signal interference.
PROG buttons do not respond... • PROG functions are not available in COMPONENT
Video Output and S-VIDEO OUT. Set TV to either RF
IN or VIDEO IN. (p. 10)
• Check Remote batteries. (p. 4)
• Press VCR or DVD button for DVD/VCR mode. (p. 28)
56