Panasonic DoubleFeature PV-D4753S Operating Instructions Manual page 26

Connection
Make the Audio/Video Connection as shown on pp. 12 ~ 15.
• You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.
The following are possible audio broadcast types and on-
screen displays.
The signal being received is indicated with an "((c" mark
while the selected audio mode is indicated with an arrow.
To display the broadcast signal being received,
÷ press DISPLAY*.
MTS Stereo and SAP broadcast
Multi-channel Television Sound
Stereo (main language) and
Secondary Audio Program (sub
language) broadcasts are being
received simultaneously.
Select STEREO or SAP audio mode.
STOP 12:00AM CH_J
_STEREO • 0:00:
([_STEREO • 0:00:
STOP ,2,OOAM O. ;j
STEREO • 0:00:
STOP 12:00AM CH 02
0:00:00
STEREO SP
SAP
_QNO •
MTS Stereo broadcast
Multi-channel Television Sound
Stereo broadcast. Select STEREO
audio mode.
• If stereo broadcast is weak and
display flickers, select MONO audio
mode for possible better results.
B_w
CD C]D (3D
CD QD QD
Dooo
DISPLAY
AUDIO
(SAP/Hi-Fi)
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP
audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
Equipped with dbz_-TV
Noise Reduction for
true MTS reproduction.
db_-TV Noise
Reduction is required
for good stereo
separation and audio
fidelity, d_ ®is a
registered trademark,
and is licensed by db_
Technology Licensing.
26