Download Print this page

Panasonic DoubleFeature PV-D4753S Operating Instructions Manual page 15

Advertisement

Connecting
Amplifier
(5.1 ch Surround
system)
Enjoy the powerful movie theater and hall-like sound available with multiple
channel audio found on DVDs by connecting
an amplifier and speakers.
There are two types of connection,
digital and analog.
A. Digital connection
(DECK
OPTICAL
Digital
Audio Output
Connector)
When DVDs recorded
in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS
bitstream
is output from the DECK OPTICAL Digital Audio Output Connector. When DECK
is connected
to a Dolby Digital decoder
or DTS decoder, you can enjoy theater-quality
audio in your home. [An optical digital audio cable (optional)
is required when an optional
Dolby Digital decoder or DTS decoder is used.]
B.Analog
connection
(5.1 ch Analog
Audio Output
Connector)
Connect an amplifier with multi-channel
audio input terminals. This DECK can decode
Dolby Digital and DTS. There are no limitations
on sampling frequency
with this kind of
connection.
Notes on connecting an optical
digital audio cable (optional)
• Firmlyconnect the cable to the
connector.
Surround
Surround
Speaker
Speaker
[5.1 ch
b_ont
Front
Speaker
Speaker
DVD/VCR DECK (Rear)
connection
To multi-channel
audio
input terminals
Subwoq_er
Decoder
with Dolby
Digital
/DTSprocessiag
A. Digital
connection
Opti¢_I Digital Audio
Cable (optional)
To Optical Digital Audio
Input Connector
Caution
for optical
digital
audio output
connector:
• When connecting
an amplifier
(with an Optical
Digital
Input Connector)
which does not
contain the Dolby Digital or DTS decoder,
be sure to select "PCM"
at "Dolby Digital"
and "PCM"
at "dts"
of the Settings
for DVD Operation
"Audio
Output" (see p. 50).
Otherwise,
any attempt
to play DVDs may cause such a high level of noise that it may
be harmful to your ears and damage
your speakers.
• When a Dolby Digital/DTS
decoder
is connected,
please select "Bitstream"
at "dts"
or
"Dolby
Digital" of the Settings
for DVD Operation
"Audio
Output".
If "PCM"
is selected, there will be stereo sound. (See p. 50.)
• Video CDs and CDs can be played as usual.
Note:
• Some DTS decoders which do not support
DVD-DTS interface
may not work properly with
DECK.
15

Advertisement

loading