Panasonic DoubleFeature PV-D4753S Operating Instructions Manual page 51

Set th_ number 61 s_eskers connected to the receiver
(amplifier, decoder.) (See pp. 14, 15.]
Do steps 1-3 on page 50.
_o_o_ Press AV
_,_ ow,_ =o_F tO select "SPEAKER
_ =_' . ....... SETUP," and
press SET to display
SPEAKER SETUP
:ACT_O_ screen.
ou/p_l' BALANCE
OELAY T_ME
S_LEeY :• •
ISPEAKER OUTPUT
Press AV
to select "SPEAKER
OUTPUT,"
and
press SET repeatedly.
(See below.)
MULTI-CHANNEL: (Factory preset)
Use this setting when 3 or more speakers are
connected. In this case, it is necessary to set
]SPEAKER StZE], [OUTPUT BALANCE], and
[DELAY TIME],
2-CHANNEL:
When 2 speakers are connected, it is not
necessary to set [SPEAKER SIZEJ, [OUTPUT
BALANCE[, and [DELA"/TtME] ]these smtiog
menu a{e not displayed.[
Press ACTlONthree times to exit.
_ QD QDI
_ (]D OD
-- ACTION
SELECT
SET
Speaker frequency propedies and the existence of speakers is set,
Do steps 1-2 of "Speaker Output Setup" above.
/ _,_._ s_z_ Press &_"
'_-3",_. ,_,_ to select "SPEAKER SIZE," and press SET
_oo_ ,o_ to display SPEAKER SIZE screen.
_ ,_o_o_ Press _V
s_,_o_ ,- - to select an item, and press SET
_ '_ repeatedly. (See below labte.)
Menu item
FRONT
CENTER
SURROUND
SUBWOOFER
Setth'_g
LARGE(factory p reset)
;MALL
LARGEfacto reset ,
NONE
LARGEi_cto _eset
;MALL
ON f_to re_t
OFF
Remark
_e_ec_wh_nth_o_ts___ontio.n_Hhen the front s eakers R/L su ort_ Iow-fre ue,_o u_der tOO Nz re _oduetion.
Hhen the center speaker supports Jow_der 100 H_e roducttot_.
Belect when the _enter&oe_ bw-fre uenc _e reduction.
t lhere is no center _peaker.
Nhen Lhe_urmuad s_eakers (R/Lt su _ unde_ IOQ Hz re roductior_.
3elec_ when the surround speakers (R,'L)does not_u or[tow-fre uenc re.eduction.
f _here is no surround speak{or.
f the_e is & sub'_oof_.
f there is no Subwoofer speaker. **
**If SUBWOOFER is set to "OFF,"
Press ACTlONfour times to exit. the front speakers are set to
"LARGE" automatically. _ 1