Advertisement
PART NAME
1.After the knock-down to Motor/Assy-Motor,
2.Shut off gas supply.
3.Disconnect gas pipe.
Burner
4.Remove all the connectors.
5.Remove two screws (one at the front and the
(GAS MODEL)
NOTE: The Igniter Bar is fragile.
So, take care when removing Burner Assy.
6.Remove the two screws attaching
7.Remove Burner Assy from the unit.
1.Remove 9 screws at the back of the unit and 2
2.Separate the Cover-Valve
3.Remove the terminal from the valve-Water
Drum-back
4.Separate Assy-Drum Back in Frame.
"
This document can not be used without Samsung's authorization"
7. Disassembly & Reassembly
DESCRIPTION
do the following.
other one at the back) securing Burner to Frame.
the housing to Burner Bracket.
screws at the Valve-Water.
68
FIGURE
Advertisement
