Advertisement
PART NAME
Drum
Front & Rear Roller
(After removing
Rear Bulkhead)
"
This document can not be used without Samsung's authorization"
7. Disassembly & Reassembly
DESCRIPTION
1. Disconnect Power Supply to Unit
2. Remove Top Cover, Console, Front Panel,
Plate(u), Front Bulkhead
3. Remove Belt
4. Lift Drum and Pull out
* Carefully spread the cabinet as
needed to get extra clearance.
But, take care not to deform
the cabinet.
1.After remove Holder-Shaft, separate each
65
FIGURE
Roller.
Advertisement
