Advertisement
PART NAME
8.Separate Assy Motor in Bottom Plate
9.Lock Blower Wheel with a screwdriver and
10.Remove Blower Fan.
11.Remove the three screws from Cover-Duct Fan.
Motor/Blower
Assembly (2)
12.Remove 2 Spring Plate Using a long-nose plier.
13.Remove 1 Screw Belt Cut Off Switch
14.Remove Holder Shaft and Roller-Idler.
■ After reassembly check the Motor work
"
This document can not be used without Samsung's authorization"
7. Disassembly & Reassembly
DESCRIPTION
separate the 14mm nut from Fan.
properly
67
FIGURE
Advertisement
