Advertisement
4. Instruction of Function
SMART CARE
The Smart Care function helps you diagnose and troubleshoot your dryer if it has an issue to check. To
enable this function, you must first download the Samsung Smart Dryer app from the Play Store or the
Apple Store, and install it on a mobile device that has a builtin camera. The Smart Care function has
been optimized for: Galaxy and iPhone series devices. (It is not supported by some models.)
As the dryer operates, it runs self-diagnosis in the background. If it senses an issue to check, it displays
an information code on the display which you can scan using the app's Smart Care function, which then
displays detailed information about the code for your reference.
1. Press and hold Anti Static (or Super Speed and Smart Control for the Delicate Dryer)
on the dryer for 3 seconds to enter the Smart Care mode.
2. Run the Samsung Smart Dryer app on your mobile device, and then tap Smart Care.
3. Hold the mobile device so that the mobile device and the dryer's status bar face each
other. The app will recognize the information code automatically.
4. When the information code is recognized correctly, the app provides detailed
information about the symptom and recommends further action.
NOTE
• The function name, Smart Care, may differ depending on your language.
• If the dryer display is reflecting light, the app may fail to recognize the information
code.
• If the app fails to recognize the information code a number of times consecutively,
enter the information code manually into the app screen.
• The information code history will be deleted after you use this function.
"
This document can not be used without Samsung's authorization"
32
Advertisement
