Advertisement
Control Panel (DELICATE DRY)
Medium: For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry
Medium.
Med Low: For heat lower than Medium. Use to dry synthetic or washable knit fabrics.
Low: For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low: Provides the lowest heated drying temperature possible.
Press Time to select a drying time for the selected cycle. This is available only with TIME DRY, AIR
07 Time
FLUFF, and WRINKLE AWAY. This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in unheated air at
the end of the cycle to reduce wrinkling. Press Wrinkle Prevent to activate this feature.
08 Wrinkle Prevent
The load is dry and can be removed at any time during the Wrinkle Prevent cycle.
This function is available with NORMAL and TIME DRY. With the Eco Dry activated, drying takes a
09 Eco Dry
longer time but power consumption is reduced. The drying time can be extended by up to 3 times
normal depending on the temperature and load. The Eco Dry function is enabled by default.
The Mixed Load Bell notifies you when the average dry level in a load is damp dry (80 % dried). Th
is lets you take items that you don't want fully dried or that dry quickly out of the dryer early
10 Mixed Load Bell
while letting others continue to dry. You can select this option in all Sensor Dry cycles except for
ACTIVE WEAR, and STEAM SANITIZE. Available dry levels are Normal, More, and Very.
Anti Static reduces static electricity that occurs from clothing friction. This is done by spraying
11 Anti Static
steam into the drum in a later stage of the drying cycle.
You can change the set time for the selected cycle. This is available only with TIME DRY, AIR
12 Adjust Time
FLUFF, and WRINKLE AWAY. To change the cycle time, press Adjust Time
until the desired time is displayed.
After connecting the Tumble Dryer to your home network using the Samsung Smart Home app,
13 Smart Control
you can control or monitor the dryer remotely. When started, the Smart Control (Smart Monitor)
Elec,) / Smart
indicator blinks and the door locks. The dryer enters waiting mode and waits for remote
Monitor (Gas)
commands.
"
This document can not be used without Samsung's authorization"
4. Instruction of Function
28
or Adjust Time
Advertisement
