Advertisement
PART NAME
1. Remove ASSY LID T.C and COVER T.C
2. There are 10 screws on COVER PLATE, remove all
3. To remove COVER PLATE, lift up backside of
COVER PLATE upside, and slide backward
simultaneously
4. There is rib on front of DUCT EXHUAST, if you pull
it with too much strength, it maybe get damaged.
AC MOTOR
5. Grab DUCT EXHAUST, pull it backward while avoid
those ribs.
6. Remove DUCT EXHAUST from BASKET
7. Remove 2 screws as shown. 8. Disconnect all
connections between wire and electrical device.
9. Then you can pull out ASSY MOTOR from dryer.
10. Remove 12 screws as Figure shown. 11. Remove
MOTOR
"
This document can not be used without Samsung's authorization"
7. Disassembly & Reassembly
DESCRIPTION
.
57
FIGURE
Advertisement
