Download Print this page

Pioneer RX-1180 Operating Instructions Manual page 19

Hide thumbs Also See for RX-1180:

Advertisement

SPECIFICATIONS
Amplifier Section
[RX-1180]
Continuous
Average
Power
Output
is 110
watts* per channel, min., at 8 ohms from 20
Hertz to 20,000 Hertz with no more than 0.05%
total harmonic distortion.
Continuous Power Output
Music power (both channel driven)
Nacits sil alttoerotal 270 W + 270 W (1 kHz, T.H.D. 10%, 8 Q)
Peak mUuSiC DOWEL.......ccccccssessserceseseeeeeseesereeeeneenaes 4080 W
(RX-1190)
Continuous
Average
Power
Output
is 125
watts* per channel, min., at 8 ohms from 20
Hertz to 20,000 Hertz with no more than 0.05%
total harmonic distortion.
[RX-1180/RX-1190]
Input (Sensitivity/Impedance)
PHONO MM...
CD,VIDEO/AUX.
.210 mV/33 kQ
MIC iscsi
orl seseestdeactananstsentsgoptenscetectenien' 0.87 mV/10 kQ
(excluding U.S. and Canadian models)
Phono Overload Level (T.H.D. 0.05%, 1,000 Hz)
PHONO: MM isccssasiezcataccopesanconseoqayensdeitusntunsasdeasoassedoce 88 mV
Frequency Response
PHONO MM
.-.20 Hz to 20,000 Hz +2 dB
CD, VIDEO/AUX
..20 Hz to 70,000 Hz + 3 dB
Hum and Noise (IHF, short circuited, A network)
PHONO MM.....
CD, VIDEO/AUX
Graphic Equalizer frequency band
Cilisdunahiosenriteteass 100 Hz, 330 Hz, 1 kHz, 3.3 kHz, 10 kHz, +12 dB
* Measured pursuant to the Federal Trade Commission's Trade Regu-
lation rule on Power Output Claims for Amplifier.
FM Tuner Section [RX-1180/RX-1190]
Frequency range...
87.5 MHz to 108 MHz
Usable Sensitivity .
4.2 ABE, IHF (1.4 uV/75 ohms)
50 dB Quieting Sensitivity .
Mono: 19.2 dBf
(2.5 uV/75 ohms)
Stereo: 41.2 dBf (31.4 uV/75 ohms)
Signal-to-Noise Ratio (IHF, 85 dBf Input} ..
.-. Mono: 70 dB
Stereo: 67 dB
Stereo Separation ...... cece
esssesenseesseresees 43 dB (1 kHz)
Frequency Response
Antenna Input
+1, dB (20 Hz to 15 kHz)
300 2 balanced
75 2 unbalanced
AM Tuner Section [RX-1180/RX-1190]
Frequency range
When 10 kHz step
..530 kHz to 1,700 kHz
When 9 kHz step..
31 kHz to 1,602 kHz
Sensitivity (IHF, Loop antenna)......0....0..ecceeee 355 uV/m
Antenna
. Loop Antenna
Tape Deck Section
Systems.
4 track, 2-channel stereo
Recording/playback head x1
Playback head x 1
Erasing head X 1
MMOUGT cab ssscsveisaccessiespaposntsseosessee DC servo 2 speed motor x 2
Wow and Flutter.
No more than 0.13% (WRMS}
Fast Winding Time.
.. Approximately 105 seconds
(C-60 tape)
Frequency Response
—20 dB recording:
Normal tape
35 Hz to 14,000 Hz +6 dB
cro,
.. 35 Hz to 15,000 Hz +6 dB
Signal-to-noise Ratio
DolbryNR ORF ace ces avclis ss cissstheaensccusdsbicasstuczouetiaasates 50 dB
Noise Reduction Effect
Dolby B type NR ON...
eee More than 10 dB (at 5 kHz)
Miscellaneous [RX-1180/RX-1190]
Power requirements
U.S. and Canadian models..........:0006 AC 120 Volts, 60 Hz
Other destination model
seesevesseeeee- AC 110 V/120-127 V/220 V/240 V (switchable),
50/60 Hz
Power Consumption
RX-1180
U.S. model
350 W, 450 VA
Other destination model.
sesseeeee 490 W
RX-1190...
410 W, 550 VA
Dimensions..
420 (W) X 280 (H) X 320 (D) mm
16-9/16 (W) X 11 (H) X 12-5/8 (D) in
Weight (without package)
RX-1180
ULS. MOE! ...sessesssesrseeesetesnesteneeeesenes 10.6 kg (23 Ib 6 oz)
Other destination model .
1. 10.9.kg (24 Ib 1 02)
. 10.9 kg (24 Ib 1 oz)
Furnished Parts [RX-1180/RX-1190]
FM T-type Antenna...
AM Loop Antenna
Operating instructions .
Remote control unit
Dry cell batteries [AAA (RO3)
Turntable [PL-888Z/PL-777AZ]
Motor, Platter
Motor Type
Drive Method
. belt drive
Speed
33-1/3, 45 RPM
Speed Variation
05% WRMS (JIS) +0.07% WTD
Peak (DIN}
S/N Ratio.
68 dB (DIN-B)
Platter...
aluminum die-cast
Tonearm
TYDG si sacctsccesessceseansasdeene static-balance type, straight tonearm
19
<ARBI057 =>

Advertisement

loading

This manual is also suitable for:

Rx-1190Pl-777azPl-888z