Download Print this page

Pioneer RX-1180 Operating Instructions Manual page 2

Hide thumbs Also See for RX-1180:

Advertisement

READ
INSTRUCTIONS — All
the
safety
and
operating instructions should be read before the
appliance is operated
RETAIN
INSTRUCTIONS —
The operating instruc-
tions should be retained for future reference.
HEED WARNING — All warnings on the appliance
and in the operating instructions should be
adhered to.
FOLLOW
INSTRUCTIONS — All operating and use
instructions should be followed
WATER AND MOISTURE — The appliance should
not be used meer water — for example, near a
bathtub, washbow!, kitchen sink, laundry tub, ina
wet basement, or near a swimming pool, etc.
LOCATION — The appliance should be instalfed in 0
stable location.
WALL OR CEILING MOUNTING — The appliance
should not be mounted to a wall or ceiling
pliance should not be situated on a bad, sofa, rug,
or similar surface that may block the ventilation
openings; or, placed in a built-in installation, such
as a bookcase or cabinet thet may impede the
flow of air through the ventilation openings.
HEAT — The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat
POWER
SOURCES —The
appliance
should
be
connected to a power supply only of the type
described
in the operating
instructions
or as
marked on the appliance.
POWER-CORD
PROTECTION — Power-supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacies, and the
point where they exit from the appliance.
POLARIZATION — If your
purchased
product
is
provided with a polarized power plug, please read
the
following
instructions.
This
product
is
equipped with 2 polarized alternating current line
plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only
one way. This is a safety feature, If you are unable
to insert the plug fully into the outlet, try reversing
SERVICE ENTRANCE
EQUIPMENT
POWER
LINES
— An outdoor antenna
should
be
located away from power fines.
NONUSE PERIODS—The power cord of the
appliance should be unptugged from the outlet
when left unused for 2 long period of time.
OBJECT AND LIQUID ENTRY
— Care shouid be
taken so that objects do not fall and liquids are
not spilled into the enclosure through openings.
DAMAGE REQUIRING SERVICE — The appliance
should be serviced by a Pioneer authorized ser-
vice center or qualified service personnel when:
© The power-supply cord or the plug has been
damaged; or
®
Objects have fallen, or liquid has been spilled into
the appliance: or
© The appliance has been exposed to rain; or
®
The appliance does not sppear to operate nor-
maliy or exhibits 2 marked change in perfor-
VENTILATION
— The appliance should be situated
mance; or
so that its location or position does not interfere
®
The appliance has been dropped; or the enclosure
with its proper ventilation. For example, the ap-
damaged.
SERVICING—~The
user should not attempt to
service the appliance beyond that described in the
Operating
instructions.
For all other servicing,
contact the nearest Pioneer authorized service
center.
POWER LINES
SERVICE
"
ENTRANCE
CONDUCTORS,
GROUND
GROUND WIRE ab
CLAMPS
SAFETY INSTRUCTIONS —
u
7
DI
ANTENNA
|
ROUNDING
tet
to provide some protection against voltage surges
and buiit up static charges
in the U.S.A. section 810 of the National Eles-
trical Code, ANSI/NFPA No. 70-1884, provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of
the lead-in wire to an antenna discharge unit, size
of grounding 'conductors, location of antenna
discharge unit, connection to grounding eles
trodes, and requirements for the grounding elec-
trode. See Fig. A.
a) Use No. 10 AWG (5.3 mm?) cop-
per, No. 8 AWG (8.4 mm?) alu-
minum, No. 17 AWG (1.0 mm2}
copperclad steel, bronze wire, or
larger as ground wire.
b) Secure
antenna
lead-in
and
ground wires to house with
stand-off insulators spaced from
4 feet (1.22 meters) to 6 feet
(1.83 meters) apart,
c) Mount antenna discharge unit as
closely as possible to where lead-
in enters house.
STAND-OFF_
d) Use jumper wire not smailer than
NSUEATORS'®
No.6 AWG (13.3 mm*) copper,
or the equivalent, when a sepa-
rate antenna-grounding electrode
is used.
See NEC Section 810-21 {j).
EAD-IN WIRE
TO EXTERNAL ANTENNA
ERMINALS OF PRODUCT
ANTENNA
SCHARGE UNIT ¢
GROUND
the plug, If the plug should still fail to fit, contact
WIRE ob
your electrician to replace your obsolete outlet
ae not defeat the safety purpose of the polarized
a
GROUND
plug,
;
POWER SERVICE
ES
CLAMPS
CLEANING — The appliance should be cleaned only
— GROUNDING ELECTRODE SYSTEM
Antal conowa ARNE
|
with a polishing cloth or a soft dry cloth. Never
(2.8: interior moral water pipe)
fi
clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the
UIRED BY
cabinet
FIG.A
H
LOCAL CODES See
MU
NEC SECTION 810-21 (1).
IMPORTANT 1
The
lightning
flash
with
arrowhead,
within
an
equilateral triangle, is intended to alert the user of the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
IMPORTANT 2
if the apparatus is fitted with AC mains power outlet(s},
see REAR PANEL FACILITIES for convenient connec-
tion of additional Hi-Fi componentis}. Make alf connec-
tions to the AC outletis} and the signal terminals first.
Connect the plug to the wall socket last, make sure that
the power switch is off. Disconnect the wail plug when
the equipment is not in (regular) use, e.g. when on
vacation,
2
<ARBIO57>
db
BonciNG
= 1
JUMPERG
oo)
FR
CAUTION
RISK OF ELECTRIC SHOCK
OO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT
REMOVE
COVER
(OR BACK).
NO
USER-
SERVICEABLE
PARTS
INSIDE.
REFER
SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
FOR USE IN THE UNITED
KINGDOM
'The wires in this mains lead are coloured in accordance
with the following code:
Blue:
Neutrat
Brown:
Live
GROUNDING ELECTRODE
DRIVEN 8 FEET (2.44 m)
INTO THE EARTH
The exclamation point within an equilateral triangle is
intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
As the colours of the wires in the mains lead of this ap-
paratus may not correspond with the coloured marking
identifying the terminais in your plug proceed as
follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or col-
oured black.
'The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or col
oured red.
Equipment sold in the U.K. is not supplied with a
power plug.

Advertisement

loading

This manual is also suitable for:

Rx-1190Pl-777azPl-888z