Advertisement
GRAPHIC EQUALIZER CONTROLS
The advantage of the GRAPHIC
EQUALIZER
over conventional
tone
controls
is that with the five controls
of the GRAPHIC
EQUALIZER
it is possible to control five different narrow. With
conventional tone controls a setting for a bass or treble boost or cut
will also affect the lower or upper mid frequencies. The frequency
bands controlled by the five slide controls have been chosen to yield
the maximum
possible control action within the audio spectrum.
100 Hz:
The 100 Hz control is very useful for enhancing
low bass notes as in organ music.
330 Hz:
The 330
Hz control
will allow you to vary the
upper bass frequencies.
4 kHz:
The 1 kHz control is the presence control and can
be used
very
effectively
to emphasize,
or de-
emphasize vocalists.
3.3 kHz:
The 3.3 kHz control will add brilliance and clarity
to brass instruments and violins.
PRELIMINARY OPERATIONS
10 kHz:
{Hz}
100
330
1
The 10 kHz contro! can be used to make up for
missing high frequencies absorbed by the environ-
ment and to add a natural crispness to music.
Emphasize
frequency
range
De-emphasize
frequency
range
BASIC OPERATIONS
@
PERFORM
THE
FOLLOWING
PROCEDURES
BEFORE
STARTING ANY OF THE OPERATIONS.
oo)
(eases ==
3
fo _9 |
3
1.Press the POWER switch to the ON.
e The STANDBY/SLEEP indicator will go out.
2. Select the SPEAKERS button.
3. Select the FUNCTION switches before operat-
ing any of the equipment.
® To listen to equipment connected to the VIDEO/AUX jacks:
[VIDEQ/AUX]
® To listen to a cassette tape: [TAPE]
® To listen to an FM or AM broadcast: [TUNER]
® To listen to a record: [PHONO]
® To listen to a compact disc: [CD]
When a function key is pressed, the corresponding indicator
lights.
12
<ARBIO57>
RECORD PLAY (PL-777AZ)
1
2:
3.
Perform the preliminary operations.
Place the record on the platter mat.
Remove the stylus cover and release the tonearm from the
arm rest.
. Set the SPEED switch.
. Move the arm elevation lever to the UP poSition.
. Move the tonearm by hand across the record. At this stage,
the platter starts to rotate.
. Move the arm elevation switch to the DOWN position.
. Adjust the volume with the VOLUME control and the tone
with the GRAPHIC EQUALIZER controls.
RECORD PLAY (PL-888Z)
Auto play
1.
2:
3.
NOoh
Perform the preliminary operations.
Place the record on the platter mat.
Remove the stylus cover and release the tonearm from the
arm rest.
. Set the SPEED and DISC SIZE switches.
. Move the ARM-ELEVATION switch to the DOWN position.
. Push the START/STOP switch to start record play.
. Adjust the volume with the VOLUME control and the tone
with the GRAPHIC EQUALIZER controls.
NOTE:
°
When play is completed, the tonearm will return automatically
to the arm rest.
°
When playing 45 rpm records with large center holes, place
the EP adaptor onto the platter shaft.
Manual play
1
2.
3.
4
5
6
. Perform the preliminary operations.
. Place the record on the platter mat.
. Remove the stylus cover and release the tonearm from the
arm rest.
. Set the SPEED switch.
. Move the ARM-ELEVATION
switch to the UP position.
. Move the tonearm by hand to the desired position over the
record.
Advertisement
