Table of Contents
Advertisement
Mode Setting
1. In the non-menu setting state, press "
2. Press "
" or "
setting mode.
3. The most selected modes are Auto, Cool, Dry, Heat, Aux Heater, Aux
Heat+Heat, Fan.
4. When the Auto or Dry mode is selected, the fan speed is fixed, the fan speed
cannot be adjusted, while the set temperature is adjustable.
5. When the Cool or Heat mode is selected, the fan speed and temperature can
be adjusted.
6. When the Fan mode is selected, the temperature display will be greyed out,
and the temperature cannot be adjusted.
7. When the mode is set to Aux Heater mode, the fan speed becomes Auto
wind, which cannot be adjusted. At this time, switch to other modes, and the
fan speed no change.
Rinnai
0
8:
1 5
AM
Auto
Cool
Dry
Heat
" to select mode, and then press "
" or "
" to select the mode setting.
23
" to change the
DRCi R32 Wired Controller OIM
Advertisement
Table of Contents
