Table of Contents
Advertisement
2. The temperature difference between the upper and lower limits of the set
temperature is greater than or equal to 5°C.
3. The parameters that can be set when the temperature zone control function
is turned on are: MaxTemperature, MaxTemperature, (Time of Validity). The
set parameters are saved, and it is still valid after power-off and power-on.
Auto with Temp Range
Auto with Temp Range
Max Temperature
Max Temperature
Term of Validity
4. The setting of Max Temperature and Min Temperature must satisfy
MinTemperature + 5°C ≤ Max Temperature;
5. Time of Validity can be set to Permanent or Custom time.
Daily Timer
1. The daily timer can be set timer on or timer off.
2. The daily timer is treated as an absolute time (the clock on the wired
controller), when the daily timer is up, the wired controller is turned on or off.
Rinnai
Permanent
30°C
Custom Time
16°C
Permanent
0
8:
1 5
AM
30
0 .
1 6
0 .
Term of Validity
°C
Max
°C
26.5°C
Min
31
Term of Validity
Permanent
Custom Time
Start Time
Stop Time
DRCi R32 Wired Controller OIM
08:00
20:00
Advertisement
Table of Contents
