Thermostat Connection To Indoor Unit; Setting Up Two Controllers - Rinnai CNTRLDRCINW Operation And Installation Manual

Thermostat connection to Indoor Unit

Setting up two Controllers

To configure a secondary CNTRLDRCINW controller do the following:
1
2
3
4
Rinnai
Figure 6.
With both controllers connected, turn power
to the system ON at the isolating switch.
Go to the proposed secondary controller
and press the copy button.
Press the confirm button to access parameters.
Press the up button
the screen as shown below.
Model A
until ' - - ' and 'Adr' appear on
13
Loom
knockout
Indoor Unit
DRCi R32 Wired Controller OIM
PCB