Table of Contents
Advertisement
11. NETWORK CONFIGURATION
•
You must select your Wi-Fi network for successful registration.
Turn off your 'mobile data'. Ignore any other network and
make sure the Android or iOS device is only connected to the
CAUTION
Wireless network you want to configure.
•
Make sure the Android or iOS device connected to your Wi-Fi
is functioning well and can connect back to your original Wi-Fi
network automatically.
How to enter AP distribution network
Press "
", use "
network. AP mode is activated if the icon is flashing.
Using Android or iOS device to complete network configuration
•
Make sure your mobile device has already been connected to the Wi-Fi network
which you want to use. Ignore other irrelevant Wi-Fi networks as it may influence
your configuration process.
When your Air Conditioner (AC) enters into 'AP' mode, the air-
conditioning remote controller can't control it. It is necessary to
finish network configuration or power the AC again in order to
NOTE
control it. Alternatively, you need to wait 8 minutes to let the AC
quit 'AP' mode automatically.
There are two ways to complete the network configuration:
•
Network configuration by Bluetooth scan
NOTE
•
Network configuration by select appliance type
Rinnai
" or "
" to select the Smart Control "
44
", to connect to the
DRCi R32 Wired Controller OIM
Advertisement
Table of Contents
