Table of Contents
Advertisement
Remote control reception
This option is applicable to Hi-Wall and Cassette models supplied
with a remote control and are configured to a wired controller.
NOTE
1. The wired controller has the function of remote control reception.
After receiving the valid code of the remote control, the TFT display status will
be refreshed according to the data such as the switch of the remote control
code, the set temperature, the set mode, the fan speed and the timer switch
value. The information is sent to the indoor unit.
2. The wired controller does not receive the digital display remote control code.
3. When the 'Follow Me' function is enabled on the wired controller, 'Follow
Me' signal is received and processed on the remote control as an invalid
signal. When 'Follow Me' function is turned off on the wired controller, 'Follow
Me' remote control signal is forwarded to the air conditioner and the wired
controller. Do not process the remote control signal of follow me, and do not
open follow me function.
4. When the child lock function is turned on, the remote control does not receive
remote control signals.
Auto Restore
1. Press "
", use "
on Auto Restore.
2. When the function of Auto Restore to original setting is changed from off to
on, the current setting mode, set temperature and set fan speed status are
memorised.
Rinnai
" or "
" to select "
35
".Press "
" or "
DRCi R32 Wired Controller OIM
", then turn
Advertisement
Table of Contents
