Subscribe to Our Youtube Channel
Related Manuals for Blue Diamond 127006
Summary of Contents for Blue Diamond 127006
- Page 1 Standard Duty Tree Puller Operation and Maintenance Manual 127006 Register your WARRANTY within 30 days of purchase 888-376-7027 | BlueDiamondAttachments.com...
- Page 2 ______________________________ Blue Diamond is continually working to improve its Dealer Number: _____________________________ products. Blue Diamond reserves the right to make any improvements or changes as deemed practical and pos- Date of Purchase: ___________________________ sible without incurring any responsibility or obligation...
-
Page 3: Table Of Contents
4.1 Maintenance Safety ..............12 4.2 Service Schedule ..............13 4.3 Storing the Attachment ............14 5. Assembly ..................15 5.1 Tree Puller Parts ..............15 6. Specifications ................16-17 6.1 Tree Puller Specifications ............16 6.2 Torque Specifications ............17 7. Warranty ..................19 Blue Diamond® Attachments... -
Page 4: Introduction
1. Introduction 1.1 Attachment Identification Main Frame Hose Set Cylinder Pivot Jaw Blue Diamond® Attachments... -
Page 5: Safety
It may also be used to she can operate the machine safely under all alert against unsafe practices. conditions of the work area. Blue Diamond® Attachments... - Page 6 The equipment must be used ONLY on approved machines. • DO NOT modify the equipment in any way. Unauthorized modification may impair the function and / or safety and could affect the life of the equipment. Warranty may also be affected or voided. Blue Diamond® Attachments...
- Page 7 Tighten or replace any parts that show leakage. • Always clean fluid spills. Do not use gasoline or diesel fuel for cleaning parts. Use commercial nonflammable solvents. Blue Diamond® Attachments...
-
Page 8: Operation
Check for loose bolts and tighten them if necessary. • Check all welds on the attachment for wear and damage each time the attachment is removed from the machine. • Check for damaged or missing safety decals. Replace if necessary. Blue Diamond® Attachments... -
Page 9: Attachment Installation
Stop the engine and remove the key. SEE MACHINE’S OPERATOR’S MANUAL FOR ADDITIONAL INFORMATION. Park the machine / attachment on a flat level surface. Place all controls in neutral, engage the park brake and stop the engine. Leave the operator’s position. Blue Diamond® Attachments... - Page 10 Visually inspect the couplers for Enter the operator’s position. See “Entering the corroding, cracking, damage, or excessive wear. Operator’s Position” on page 9. Connect the attachment hydraulic hoses to the machine. Pull on each hose to verify full connection is made. Blue Diamond® Attachments...
-
Page 11: Operating The Attachment
Pull upward until roots are clear of the ground taking caution to keep the prime mover balanced. Depending on the difficulty, taking a new grip from a different direction or shaking the tree or bush may help. Blue Diamond® Attachments... -
Page 12: Maintenance
AVOID SERIOUS INJURY OR DEATH used to restore your equipment to original Never operate the machine in a closed specifications. Blue Diamond will not be building. Proper ventilation is required responsible for injuries or damage caused by when operating the machine under all use of unapproved parts and / or accessories. -
Page 13: Service Schedule
Daily Maintenance (or every 8 hours) Hydraulic Fittings • • Hydraulic Hoses • All Hardware • • Tree Puller Frame Pivot Pins • Hydraulic Cylinder • NOTE: Check tree puller for correct function after adjustments, repairs or service. Blue Diamond® Attachments... -
Page 14: Storing The Attachment
Place the attachment in a dry protected shelter. • Place the attachment flat on the ground. NOTE: In muddy conditions or to prevent the attachment from freezing to the ground, put the attachment on planks or blocks before removing the attachment from the machine. Blue Diamond® Attachments... -
Page 15: Assembly
Cylinder Pin Nut 295030-M06ORB-M06JIC Cylinder to hose 90 fitting 295010-M06JIC-M06ORB Cylinder to hose straight fitting 227106 Hose Set 206327 Hose protection sleeve 6 ft 295010-M06JIC-M08ORB Hose to Coupler fitting 224009 Female Quick Coupler 224010 Male Quick Coupler Blue Diamond® Attachments... -
Page 16: Specifications
6. Specifications 6.1 Tree Puller Specifications DESCRIPTION TREE PULLER OVERALL WIDTH 46 in. OVERALL LENGTH 30 1/2 in. OVERALL HEIGHT 19 in. CLAMP LENGTH 19 in. CLAMP OPENING 12 in. MAXIMUM TREE SIZE 8 in. WEIGHT 415 lbs. Blue Diamond® Attachments... -
Page 17: Torque Specifications
547 ft / lb 708 ft / lb 773 ft / lb 1000 ft / lb 386 ft / lb 545 ft / lb (289 N•m) (373 N•m) (742 N•m) (960 N•m) (1048 N•m) (1356 N•m) (523 N•m) (739 N•m) Blue Diamond® Attachments... - Page 18 This page intentionally left blank Blue Diamond® Attachments...
-
Page 19: Warranty
ATTACHMENTS before work is performed. ® The BLUE DIAMOND® PRODUCT SUPPORT TEAM will advise repairs and applicable parts exchanges. Tampering with the failed part may void the warranty. This warranty does not include freight or delivery charges incurred when returning machinery for servicing. Dealer mileage, service calls, and pickup/delivery charges are the customers’... - Page 20 QUALITY | DEPENDABILITY | INTEGRITY Blue Diamond® Attachments 4512 Anderson Road, Knoxville, TN 37918 888-376-7027...
Need help?
Do you have a question about the 127006 and is the answer not in the manual?
Questions and answers