Subscribe to Our Youtube Channel
Related Manuals for Blue Diamond 127006
Summary of Contents for Blue Diamond 127006
- Page 1 Heavy Duty Tree Puller Operation and Maintenance Manual Register your WARRANTY within 30 days of purchase 888-376-7027 | BlueDiamondAttachments.com...
- Page 2 Model Number: _____________________________ Blue Diamond is continually working to improve its Serial Number: _____________________________ products. Blue Diamond reserves the right to make any Dealer Name: ______________________________ improvements or changes as deemed practical and pos- sible without incurring any responsibility or obligation...
-
Page 3: Table Of Contents
4.1 Maintenance Safety ..............11 4.2 Service Schedule ..............12 4.3 Storing the Attachment ............13 5. Assembly ..................14 5.1 Tree Puller Parts ..............14 6. Specifications ................15-16 6.1 Tree Puller Specifications ............15 6.2 Torque Specifications ............16 7. Warranty ..................17 Blue Diamond® Attachments... -
Page 4: Introduction
1. Introduction 1.1 Attachment Identification Main Frame Cylinder Cover Pivot Jaw Hose Set Blue Diamond® Attachments... -
Page 5: Safety
It may also be used to alert against unsafe practices. NOTE: Notes are used to indicate important information. This information may be repeated in other areas of the manual. Blue Diamond® Attachments... - Page 6 Keep shields and guards in place. Replace if diesel fuel for cleaning parts. Use commercial damaged. nonflammable solvents. • DO NOT operate equipment in poor visibility conditions such as fog, darkness, or any conditions that limit clear visibility less than Blue Diamond® Attachments...
-
Page 7: Operation
Check for damaged or missing safety decals. Replace if necessary. • Inspect the machine’s mounting frame. (See the machine’s Operator’s Manual for inspecting the mounting frame). Replace any parts that are damaged, bent or missing. Keep all fasteners tight. Look for cracked welds. Blue Diamond® Attachments... - Page 8 Wait for all moving parts to stop. SEE MACHINE’S OPERATOR’S MANUAL FOR ADDITIONAL INFORMATION. Park the machine / attachment on a flat level surface. Place all controls in neutral, engage the park brake and stop the engine. Leave the operator’s position. Blue Diamond® Attachments...
-
Page 9: Attachment Installation
Visually inspect the couplers for Enter the operator’s position. See “Entering the corroding, cracking, damage, or excessive wear. Operator’s Position” on page 8. Connect the attachment hydraulic hoses to the machine. Pull on each hose to verify full connection is made. Blue Diamond® Attachments... -
Page 10: Operating The Attachment
Pull upward until roots are clear of the ground taking caution to keep the prime mover balanced. Depending on the difficulty, taking a new grip from a different direction or shaking the tree or bush may help. Blue Diamond® Attachments... -
Page 11: Maintenance
When replacement parts are necessary, genuine factory replacement parts must be used to restore your equipment to original specifications. Blue Diamond will not be responsible for injuries or damage caused by use of unapproved parts and / or accessories. Blue Diamond® Attachments... -
Page 12: Service Schedule
Daily Maintenance (or every 8 hours) Hydraulic Fittings • • Hydraulic Hoses • All Hardware • • Tree Puller Frame Pivot Pins • Hydraulic Cylinder • NOTE: Check tree puller for correct function after adjustments, repairs or service. Blue Diamond® Attachments... -
Page 13: Storing The Attachment
Place the attachment in a dry protected shelter. • Place the attachment flat on the ground. NOTE: In muddy conditions or to prevent the attachment from freezing to the ground, put the attachment on planks or blocks before removing the attachment from the machine. Blue Diamond® Attachments... -
Page 14: Assembly
Coupler, Female Flat Face Style 1/2” Body, 1/2” Pipe Thread 295030-M06JIC-M08NPT -6 37° Flare JIC to -8 NPT 295010-M06JIC-M04ORB 1/4 ORB to 3/8” JIC straight fitting 227010 Tree Puller Hoses No Couplers (3/8” x 84” & 94”) 299329 Pin Retaining Bolt 208550 Pin Retaining Nut Blue Diamond® Attachments... -
Page 15: Specifications
TREE PULLER OVERALL WIDTH 50 1/2 in. OVERALL LENGTH 30 1/2 in. OVERALL HEIGHT 20 1/2 in. CLAMP LENGTH 19 in. CLAMP OPENING 10 in. MAXIMUM TREE SIZE 8 in. WEIGHT 415 lbs. MAX PRESSURE 3200 PSI Blue Diamond® Attachments... -
Page 16: Torque Specifications
547 ft / lb 708 ft / lb 773 ft / lb 1000 ft / lb 386 ft / lb 545 ft / lb (289 N•m) (373 N•m) (742 N•m) (960 N•m) (1048 N•m) (1356 N•m) (523 N•m) (739 N•m) Blue Diamond® Attachments... -
Page 17: Warranty
ATTACHMENTS before work is performed. ® The BLUE DIAMOND® PRODUCT SUPPORT TEAM will advise repairs and applicable parts exchanges. Tampering with the failed part may void the warranty. This warranty does not include freight or delivery charges incurred when returning machinery for servicing. Dealer mileage, service calls, and pickup/delivery charges are the customers’... - Page 18 QUALITY | DEPENDABILITY | INTEGRITY Blue Diamond® Attachments 4512 Anderson Road, Knoxville, TN 37918 888-376-7027...
Need help?
Do you have a question about the 127006 and is the answer not in the manual?
Questions and answers