Emg5723-T50K - ZyXEL Communications VMG Series User Manual

2.1.6 EMG5723-T50K

Figure 22 EMG5723-T50K
The following are the LED descriptions of your EMG5723-T50K.
Table 8 EMG5723-T50K LED Descriptions
LED
Power
WAN
Internet
Chapter 2 Hardware
COLOR STATUS DESCRIPTION
Green On The Zyxel Device is receiving power and ready for use.
Blinking The Zyxel Device is self-testing.
Red On The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking The Zyxel Device is upgrading firmware.
Off The Zyxel Device is not receiving power.
Green On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
on the WAN.
Off There is no Ethernet connection on the WAN.
Green On Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used).
Blinking The Zyxel Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
VMG/EMG/AM/DM/GM Series User's Guide
40