Emg5523-T50B - ZyXEL Communications VMG Series User Manual

Hide thumbs Also See for VMG Series:
Table of Contents

Advertisement

2.1.5 EMG5523-T50B

Figure 21 EMG5523-T50B
The following are the LED descriptions of your EMG5523-T50B.
Table 7 EMG5523-T50B LED Descriptions
LED
Power
Ethernet
WAN
Internet
Chapter 2 Hardware
COLOR
STATUS
Green
On
Blinking
Red
On
Blinking
Off
Green
On
Off
Green
On
Blinking
Off
Red
On
VMG/EMG/AM/DM/GM Series User's Guide
DESCRIPTION
The Zyxel Device is receiving power and ready for use.
The Zyxel Device is self-testing.
The Zyxel Device detected an error while self-testing, or there is a
device malfunction.
The Zyxel Device is upgrading firmware.
The Zyxel Device is not receiving power.
The Ethernet link is up.
The Ethernet link is down.
The Zyxel Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if used)
and the DSL connection is up.
The Zyxel Device is sending or receiving IP traffic.
There is no Internet connection or the gateway is in bridged mode.
The Zyxel Device attempted to make an IP connection but failed.
Possible causes are no response from a DHCP server, no PPPoE
response, PPPoE authentication failed.
38

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents