Press Play - Pioneer LaserDisc CLD-980 Operating Instructions Manual

Selected chapters (LD} or tracks (CDV/CD) can be played in
any desired order (max. 24 chapters or tracks).
e@ You can view the state of programming on the moniter
TV screen.
[Example To play CD tracks No. 9, No. 7, and No. 18 in this order:
1 Press PGM. 2 Enter
Display with CD
PGM 03 00°12 PLAY
Total Time Program
00 60°00 Step-01
——,
9
[7], [+10], and[a] with
number with the digit keys.
the digit keys.
lf you make a mistake during entry:
Press CLEAR and enter the correct
After approx. 1 second
03 00+19 PLAY
Total Time
o 04°15
Program
Strep-02
[9 |
After approx. 1 second
03 00°25
Total Time
02 08*30
09 07 >-
PLAY
Program
Step-c3
ry]
py
After approx. 1 second
03 00°32
Totai Time
03 12°56
09 07 18>--
PLAY
Program
Step-04
3 Press PLAY ».
q @ Search
call Track 99
> Program
agg -
The first track {chapter) in the program is searched for and
played. In this example, Program Playback starts at the
beginning of track number 9.
After tracks No. 9, No. 7, and No.18 have been played, the
player enters stop mode.
During program playback, the PROGRAM indicator on the
front panel is iit.
To stop program play in the middle:
@ Press STOP & on the front panel of the player or EJECT s/&
on the remote contral unit, or
@ Press CLEAR
To clear the program contents:
@ Open the disc table, or
@ Prass CLEAR in stop mode
Prograrnming a pause:
When recording on a cassette tape, a programmed pause allows
you to change the tape side or to record a blank section on the
tape which Is useful for music search functions, etc.
When a program is in pause mode, pressing PAUSE § resumes
disc playback, so restart recording before pressing PAUSE i.
To program a pause:
in step 2 of the above procedure, press PAUSE 8 instead of
entering a chapter or tack number,
32
<VRB1037>
NOTES:
e A pause cannot be programmed for step 1 (01), and it cannot
be programmed for two consecutive steps.
e A pause can be programmed for the iast program step, however,
it will not be effective.
Programmed pause indication:
On the monitor screen ~ H
To go to the previous or next chapter {track} in a program:
Press CHAPTER SKIP/TRACK SEARCH ined of bet,
NOTES:
@ With LDs, the total time and remain time cannot be displayed
during program input mode and program playback.
@ With CDs, when track No. 37 or more is programmed, the total
time and remain time cannot be displayed.
TO PLAY ONLY THE DESIRED SCENES/TRACKS - Program Playback |