Basic Operation; To Play A Compact Disc - Pioneer PD-M630 Operating Instructions Manual

Multi-play compact disc player
Hide thumbs Also See for PD-M630:
Table of Contents

Advertisement

| BASIC OPERATION
SOWA
r=)
STANDBY/ON
f7
it PAUSE:
PAUSE
"
ie]
m@ STOP/CLEAR:
story
CLEAR
a
Si
CJ)
Ls
10
<PRB1123>
En
To play a compact disc
1 Turn on the power to the player.
2 insert a magazine, pushing it in until a click
sound is heard.
®
For the magazine whose TOC data are already stored, the
magazine is identified just by reading the TOC data of the
first disc and the TOC data for the 1st disc to 6th disc are
also displayed one by one.
* TOC {Table Of Contents):
it has track numbers, total track numbers and total playing
time of the tracks recorded in the inner circumference of
the disc.
@
Insert the discs to be played into the magazine beforehand.
(Refer to "BEFORE OPERATING THE PLAYER")
3 Start playback.
@ The PLAY button can be pressed even when TOC is being
read.
In such a case, the TOC not yet read will be read
after playback is finished.
To pause playback temporarily:
To stop playback:
Press STOP/CLEAR. The player returns to the beginning of the
first wack on the disc at which playback was stopped. If STOP/
CLEAR is pressed twice, the player returns to the beginning of
the first track on the first disc and enters stop mode.
NOTE:
Cautions regarding handling of magazines
@
Do not take magazines apart.
CAUTION:
7
Do not unplug the power cord or do not turn off the power with
an audio timer during playback, as this could result in damage to
the disc.

Advertisement

Table of Contents
loading

Table of Contents