Table of Contents
Advertisement
PRECAUTIONS
Always remove the disc when this unit is moved or
packed for transportation.
After removing the disc,
return the disc table and turn the power OFF.
INSTALLING THE PLAYER
@ Place the player on a stable platform next to the television
and stereo system to be used with the player.
@ When
using the player with a stereo
system,
your
speakers should be placed away from your television (or
TV monitor).
@
Do not place heavy objects such as a television or TV
monitor on top of the player.
@
Do not place the player on top of your TV set or TV
monitor, Also, keep the player away from devices such
as cassette decks which are sensitive to magnetic fields.
When FM or AM stations are being received, signal noise
may be generated if the player is turned on. Turn off the
player when not in use. Also, if there is signal noise when
receiving radio stations with an indoor antenna, adjust the
position or direction of the antenna.
INSTALL THE PLAYER
IN A WELL
VENTILATED
PLACE AWAY FROM HEAT
AND HUMIDITY
Do not install the player in a location subject to direct
sunlight, or near a stove or radiator etc. This could adversely
affect the cabinet
and internal components.
Also avoid
installing the player in a humid or dusty location. This could
result in a malfunction or accident. Do not install near a
cookstove where the player could be affected by smoke,
steam, or heat.
AVOID SOURCES OF HEAT
Do not put the player on sources
of heat, such as an
amplifier. When installing with audio components on a rack,
avoid components that generate heat, by placing the player
below such components where there is adequate ventilation
and not much dust. Avoid placing the player on surfaces
such as shaggy carpets, beds, and sofas which may block
ventilation under the player and cause damage.
CAUTIONS FOR AUTOMATIC LOADING
OPERATIONS
Since this player has an automatic loading construction,
use the key on the player or the remote control unit
for opening and closing of the disc table. To avoid
damage,
be careful
not to apply any force to the
moving disc table.
4
<VRB1037>
STRIPE
PATTERNS
APPEARING
ON
A
TV
PROGRAM
Stripe patterns may appear during a TV program if the player
unit is turned on, depending on the quality of reception of
the TV station. This is neither a malfunction of the television
nor the player. If stripes appear while watching the TV, or
when watching the TV for long periods of time, turn the
player off.
CONDENSATION
Moisture will form in the operating section of the player
if the player is brought from coof surroundings into a
warm
room
or if the temperature
of the room
rises
suddenly. When this happens, player's performance will
be impaired.
To
prevent
this,
let the
player
stand
in its new
surroundings for about an hour before switching it on,
or make sure that the room temperature rises gradually.
The same, symptoms of condensation may be caused during
summer, if the player is exposed to the breeze from an air
conditioner. In such cases change the location of the player.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging
the cord and never touch the power cord when your hands are wet as
this could cause a short circuit or electric shock, Do not place the unit,
a prece of furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The power cords
should be routed such that they are not likely to be stepped on.
A
damaged power cord can cause fire or give you an electrical shock
Check the power cord once ina while. When you find it damaged, ask
your nearest PIONEER authorized service center or your dealer for a
replacement.
CLEANING CARE
Use a soft, dry cloth for cleaning. For stubborn dirt, soak
the cloth ina weak detergent solution; wring well first
and wipe. Use a dry cloth to wipe it dry. Do not use any
volatile agents such as benzine or paint thinner, as it may
damage the surface of the player.
Advertisement
Table of Contents
