Compliance; For Customers In Europe - EM Acoustics Di06 Product User Manual

COMPLIANCE

FOR CUSTOMERS IN EUROPE

This product complies with both the LVD (electrical safety) 73/23/EEC and EMC
(electromagnetic compatibility) 89/336/EEC directives issues by the commission of the
European community.
Compliance with these directives implies conformity with the following European standards:
EN60065 Product safety
EN55103-1 EMC emissions
EN55103-2 EMC immunity
This product is intended for the following electromagnetic environments: E1, E2; E3 & E4.
THIS PRODUCT MUST BE EARTHED. Use only a flexible cable or cord with a green and yellow
core which must be connected to the protective earthing terminal of a suitable mains plug or
the earthing terminal of the installation. The cord must be a maximum of 2m long, have a
2.5mm CSA, a 300/500V rating and comply with EN50525-2-11 / H05W-F.
2
THIS PRODUCT IS DESIGNED FOR PERMANENT INSTALLATION. It must be fitted in to a 19"
rack enclosure and not operated unless so installed. The rack enclosure should be open at the
front and back to allow free ventilation and movement of air through the product.
8