Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Mechanical Installation
482
431
The Di Series Amplifiers are designed to be mounted in a standard 19" rack enclosure.
Where the amplifier is used in a fixed installation, as long as the bottom unit is supported and there
are no gaps between units, it is acceptable to use only the front panel 19" rack holes when fitting it in
a standard rack enclosure. If the amplifier is mounted in a mobile rack it is important that the rear is
supported with a rear rack mounting kit (part number ZA1182). Damage caused by insufficient
support is not covered by the warranty.
12
Advertisement
Table of Contents
