Operation; Starting Up The Unit; Overview Of Modules, Presets Components And Snapshots - EM Acoustics Di06 Product User Manual

Operation

Starting up the unit

When power switch is switched on the unit will go through its start-up cycle, checking all the sub-
systems as it does so. Along the way, the indicators will inform you of its progress by lighting more
indicators while the indicated progress 'wheel' turns to show activity. Once this is complete the
indicators will take up their normal states.

Overview of Modules, Presets Components and Snapshots

Drive Module
A represents a loudspeaker subsystem (e.g. Sub and Composite), and comprises one
input channel and a number of output channels, associated with one-another by routing. The size of
the Drive module is determined by the number of outputs in it. The device may contain up to four
Modules (eight on the 88C).
Module Preset
A is a collection of settings (parameters) for a Drive Module of a particular size. The
Preset contains a set of parameters for one input and a set of parameters for each of the outputs in
the module. When a Module Preset is recalled, it will automatically change the routing between Input
DSPs and Outputs, consuming a number of outputs according to the size of the Drive Module.
Recalling a Module Preset thus always creates a Drive Module with consecutive outputs.
Component
A is a collection of settings (parameters) for one (input or output) channel. Any one of the
output components in a Module Preset may be recalled to any individual output.
Output 1
DSP Input A
Output 2
Output
component
Input parameters
component
parameters
Output
component
parameters
Output
component
parameters
Input
parameters
Output
component
parameters
Component
21