Technical Specifications; General; Audio; Digital Processing - EM Acoustics Di06 Product User Manual

Advanced installation amplifier
Table of Contents

Advertisement

Technical Specifications

General

Number of Output channels
Total power output
Input types
Control, monitoring & alarm
Energy saving modes
System sleep and wakeup
Max ambient temperature (full power, no limiting)

Audio

Amplifier topology
Amplifier modulation scheme
Dynamic range (analog input to speaker output)
Dynamic range (AES3 or Dante input to output)
Frequency response
Total harmonic distortion, THD
Inter-channel crosstalk (worst combination of
channels)
Maximum analog input level
Slew rate
Damping factor (Ref 8 Ohms)
Analog input sensitivity range for full output
Analog input
Analog link
Analog ground scheme
AES3 input
AES3 link
AES3 supported sampling rates

Digital processing

Resolution
Sample rate
Special functionality:
Class leading limiter suite
Hardman crossover filters
LIR crossover filters
FIR Shelving EQ filters
Overlays
Eight
20,000/10,000/6,000 Watts RMS (Di20, Di10, Di06)
Analog, AES3 (Dante as model option)
Ethernet, configurable function Volt-free relay and contact
closure port
Standby and deep sleep, both with auto-sleep timers
Front panel switch, network command, contact closure and
audio detection
40degC (105degF)
Proprietary 5th generation Linea Research Class D.
Low feedback, multiple loop, with feedforward error
correction.
>113dBA typ.
>114dBA typ.
<7Hz to >30kHz, 4 Ohms, -2.5dB.
<0.05% typ, 1kHz, AES17, 4 Ohms.
better than -85dBr at 1kHz.
better than -75dBr at 10kHz.
+20dBu.
>60V per microsecond typical
>800 at amplifier output (see Linea's "Damping factor
debunked" whitepaper)
0dBu to +20dBu, continuously adjustable.
20k Ohm, electronically balanced.
Directly connected to the analog input.
AES48 standard compliant.
Transformer isolated with active cable equalisation for
extended range (unique to Linea).
Active signal regeneration with automatic direct bypass
to the AES3 input if the unit is unpowered.
24kHz to 192kHz (auto locking).
40 bit, using proprietary LMD (Linea-Micro-Detail) algorithms.
96kHz throughout.
See the 'speaker protection systems' section.
Better out of band rejection than Linkwitz-Riley (Unique to Linea).
Linear Phase without the compromises of FIR filters (Unique to Linea).
For linear phase filtering.
Twelve additional independent overlays of EQ, Delay and Gain.
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di10Di20

Table of Contents