Frymaster J1C/MJ15 Operation, Service And Parts Manual page 8

e. The burner will now light and is controllable by the
thermostat.
CAUTION: If the pilot and main burner go out, the
fryer(s) MUST be completely shut down at least 5
minutes before lighting.
ACCESSING FRYERS FOR SERVICING
WARNING: Moving a fryer filled with hot shortening
may cause splattering of hot shortening. Extreme
care must be exercised. It is recommended that the
operator or servicer follow the draining instructions of
this manual before attempting to relocate the fryer.
a. Disconnect the quick-disconnect hose.
b. Remove restraining devices typically applied to
the bottom or the back of the fryer.
c. Relocate the fryer for service accessibility.
d. After servicing is complete, reconnect the quick-
disconnect hose. Attach the restraining devices.
SHUTTING FRYER(S) OFF FOR SHORT
PERIODS
a. Open fryer door(s) and turn gas valve knob(s) to
the PILOT position. See Figure 1.
b. Depress gas valve knob(s) and turn slightly
clockwise.
c. Release and continue turning clockwise to the
OFF position. See Figure 3.
5