Advertisement
s the Scan button.
2. Locate the nose cone in the carrying case, and carefully place the
2. Locate the nose cone in the carrying case, and carefully place the slotted end
slotted end over the laser exit aperture, as shown below.
over the laser exit aperture, as shown below.
2. Locate the nose cone in the carrying case, and carefully place the
slotted end over the laser exit aperture, as shown below.
ted, the result will either be a PASS or a
r a
r a
Self Test PASS: Instrument correctly
y
identified the polystyrene rod,
ly
indicating proper functionality.
3. On the Home screen, press the Profiles button.
3. On the Home screen, press the Profiles button.
3. On the Home screen, press the Profiles button.
Self Test FAIL: Instrument could not
ot
properly identify polystyrene and
not
should not be used until the problems
ms
are corrected. Wipe the polystyrene
and select the TF_Narcotics profile, as shown below.
e
ms
rod with a damp cloth, place in vial
l
and select the TF_Narcotics profile, as shown.
and select the TF_Narcotics profile, as shown below.
e
holder and perform a second Self
al
Test. If the result is FAIL, contact
Customer Support.
Results
ed transparent plastic bag, the
yze the substance directly through the
he
he
od from the vial holder, and remove the
he
exit aperture.
the
Nose cone
Nose cone
2. Locate the nose cone in the carryin
slotted end over the laser exit apertu
3. On the Home screen, press the Pro
and select the TF_Narcotics profile
1064Defender Quick Start Guide
Nose cone
9
Advertisement
