Advertisement
1. Part Names
@ Front Panel
@ VOLUME
(Volume Control Knob)
This adjusts the overall volume which is the output from the Output Jacks or Headphone
Jack.
Rotating the knob clockwise will increase the volume, and rotating it counter-
clockwise will decrease it.
* The volume balance of the individual Part can be controlled with the MIDI Volume
(Control Change) messages.
€ AUDIO
(Audio Signal Indicator Light)
Regardless of where the volume knob is set, this lights to indicate that a signal (above
the threshold level) is being output.
Roland CM-300
<%
= SOUND
MODULE
«€ POWER SWITCH
Turns the power on and off.
ж This unit is equipped with a circuit protection device.
А brief interval after power up
is required before the unit will operate.
% POWER
(Power Indicator Light)
Indicates that the power is on.
Advertisement
