Download Print this page

Roland CM-300 Owner's Manual page 23

Gs sound module
Hide thumbs Also See for CM-300:

Advertisement

2» Expression (Control Number
11/OBH)
This adjusts the mix volume for each part.
The actual volume level that goes to your audio device is determined by a combination
of Volume
(Control Change 7/07H), Expression (Control Change
11/0BH) and Master
Volume
(Exclusive Message) settings, plus the setting of the VOLUME
knob.
© Hold 1 (Control Number 64/40H)
This sustains a note, similar to the action of a piano damper pedal.
© Portamento
(Control Number
65/41H)
This turns the Portamento effect on and off.
© Sostenuto (Control Number
66/42H)
This turns the Chord Hold feature on and off.
©) Soft (Control Number
67/43H)
This applies the Soft Pedal effect.
4Э Legato Control (Control Number 84/54H)
This applies the same kind of effect as Portamento, but to each note number individually.
бз Effect 1 Depth (Control Number 91/5BH)
This adjusts reverb parameters individually for each part.
© Effect З Depth (Control Number
93/5DH)
This adjusts chorus parameters individually for each part.
(© NRPN LSB, MSB (Control Number 98/62H, 99/63H)
These control sound source parameters.
After identifying the parameters you want to
change with NRPN
MSB and NRPN
LSB, use data entry to set the values.
* Check the MIDI Implementation for a list of the Parameters that you can control in this
manner.
© RPN LSB, MSB (Control Number 100/64H, 101/65H)
These control sound source parameters.
After identifying the parameters you want to
change with RPN
MSB and RPN
LSB, use data entry to set the values.
* Check the MIDI Implementation for a list of the Parameters that you can control in this
manner.
© All Note Off (Control Number 120/78H)
Sends a Note Off command to all voices.
21

Advertisement

loading