Programming The Co-Processor - CalAmp LMU-5541 Hardware And Installation Manual

9/28/23, 4:30 PM
At the prompt c:\tftpboot, type: dir <enter> (to see and verify the files)
At the prompt c:\tftpboot, type: sb_loader.exe -f u-boot-lmu5541-btstrp.imx <enter>
In the command prompt screen, wait for an indication of a successful download.
Looking at the Terminal Emulation screen, you will see up to 9 files being serially loaded. Wait until all the files have been loaded as it takes several minutes. After
all files are loaded "U-boot Upgrade complete" will appear on the terminal emulation screen.

8.7 Programming the co-processor

WinSCP will be used to transfer the firmware for the co-processor into the Linux system after it is running.
Launch WinSCP
Select File Protocol: SCP
Enter Host Name: 192.168.1.55
Enter Port Number: 2001
Enter Username: root
Enter Password: SB327 Compliant Password. Please reachout to your FAE for details
Click on Login
A new WinSCP screen will appear. On the left side, browse for C:\tftpboot
The right half should be pointed to the /root directory in the LMU-5541.
https://puls.calamp.com/wiki/LMU-5541_Hardware_%26_Installation_Guide
LMU-5541 Hardware & Installation Guide - PULS Wiki
28/29