Advertisement
1. Removing the metal cover
1)
2)
Remove the 4 screws holding the both
sides of the metal cover, and the 2 screws
holding the rear side of it.
Gently spread both sides of the metal
cover to the outside, lift up the rear
section, and remove the metal cover.
2.Removing the tray assembly
1)
2)
3)
4)
Remove the metal cover.
Turn on the power. Press the OPEN / CLOSE
switch to move the tray out and the power
off.
Remove the screw © on the tray.
Pull the tray toward the front to move it.
Note:
If the power can not be turned on due
to a malfunction , etc., insert a Philips
screwdriver through the hole on the
bottom and turn it clockwise to move
the tray out.
3.removing the mechanism assembly
1)
2)
3)
4)
Remove the metal cover.
Remove the tray assembly.
Remove the 2 screws ® holding the clamp
assembly, then remove the clamp
assembly.
Remove the 3 screws © holding the
mechanism assembly.
4.Removing the rear panel
1)
2)
Remove the 6 screws © holding the rear
panel.(8 screws ©, © for with AC selector)
Remove the rear panel.
5.Removing the main P.C. Board
1)
2)
3)
4)
(FSN-004-1 for XL-V161TN/162BK,FSN-005-1
for XL-V261TN/262BK)
Remove the metal cover.
Remove the rear panel.
Remove the 4 screws © holding the
P.C.board and 2 screws © holding the
transformer.
Remove the connectors connecting with
the main P.C.board.
6.Removing the front panel assembly
1)
2)
3)
4)
5)
6)
Remove the metal cover.
Remove the tray assembly.
Remove the screw @ on the bottom of the
front panel.
Remove the connector.
Remove the screw © holding the bracket.
Release the hooks @ holding the front
panel and remove the front panel
assembly.
XL-V163TN/V 164BK
XL-V263TN/V264BK
Figure 1
Figure 2
Figure 3
O
@
_sTRAY OPEN
Figure 4
1-25 (No.20392)
EA S R B P
Ce
ae
PE Pe N a N I i
t i ic R l l
tn ae B t N
Ae ee L R e ae I a a ol
Advertisement
