Advertisement
HSITISNA
HOW TO OPERATE
Preliminary Operation
To Stop Play
1. Turn on and adjust components such as an
Press the [gS TOP/CLEAR] or (m) button.
amplifier.
2. Turn on the CD player.
Notes:
To Play From Any Desired
Selection
1, Designate the desired selection number by
the 10 key operating buttons.
Examples:
Note:
¢ Tocontinue playing, press the [PLAY >/lt
PAUSE] or (>) button again.
Press the [( 4
)] button.
To Repeat Play
¢ To repeat all the selections
© To repeat one selection
To Remove the Disc
Press the [OPEN/CLOSE ( & )} button.
To Program Piay
1. Press the [mSTOP/CLEAR] or (m) button.
2. Press the [PROGRAM] button.
3. Program any desired selections with the 10
key operating buttons.
4. Press the [PLAY »/1! PAUSE] or (>) button.
To Correct the Program
© To correct all the program
1. Press the [mSTOP/CLEAR] or (m) button.
2. Start programming again from the begin-
ning.
¢ Tocorrect each content of the program dur-
ing programming
1. Press the [(é< )] button to go back to the
program which needs to be cancelled.
2. Press the [(CANCEL)] button.
3. Program a desired selection with the 10 key
operating buttons.
* Newly programmed selection is added to the
last of the program.
To Check the Program
Press the [(<¢ ,»>s4)] button.
Notes:
¢ A maximum of 32 out of 99 tunes can be
selected.
e When the programmed play is performed,
the selection number programmed first
and the total playing time of programmed
selections are dispiayed.
The total playing time display is useful
when
making recording from the CD
player.
¢ When programming Is carried out with
the disc tray out, the total playing time of
the programmed selections will not be
displayed.
e When the total playing time of all the
selected tunes exceeds 99 minutes and
59 seconds, the time display will be disa-
bled and only the center bar will be dis-
played.
Pressing the [(»1)] button when In the
programmed play causes the unit to skip
to the next programmed selection.
To stop temporarily during programmed
play, press the [PLAY »/it PAUSE] or (11)
button. Press this button again to restart.
To Random Play
1. Press the [mSTOP/CLEAR] or (m) button.
2. Press the ((RANDOM)] button.
3. Press the [PLAY >/1t PAUSE] or (>) button.
To Cancel the part of Random
Play
1. Select the track(s) you want to cancel with
the 10 key operating buttons.
{
]:The button on the main unit.
:
(_)}: The button on the remote control.
:
To add cancelled track(s) to
;
Random Play
'
1. Select the cancelled track(s) you want to add
to Random Play with the 10 key operating
|
buttons or [(<,~[)] button.
i
2. Press the [(PROGRAM)] button.
i
To Perform Synchronized
Recording
j
Synchronized recording is possible by connect-
ing the cassette deck to the COMPU LINK-1, 3/
SYNCHRO terminals of the CD player through
the remote cable.
1. Press the [REC (0 )] and [PAUSE (18 )] but-
tons of the cassette deck.
2. Press the [PLAY »/tt PAUSE] or (>) button
of the CD player to start the synchronized
recording.
3. Press the [STOP/CLEAR (
)] or (m) button
to stop recording.
To record using DDRP
Whenever
the remote cable supplied is con-
nected to the COMPU
LINK-1, 3/SYNCHRO
terminals housed in a DDRP-compatible cas-
sette deck (with its power on), DDRP recording
mode is available.
By pressing the [DDRP] button, recording is
automatically started as soon as the peak level
search routine is completed.
To Perform Edit Recording
¢ Auto Edit Recording
Automatically distributes and edits the tracks
accommodated within the specified time to
sides A and B.
1. Set a disc and press the (m™STOP/CLEAR]
or (@) button.
2. Press the {EDITING} button to light AUTO.
|
3. Set the recording time corresponding with
|
the tape used, using the numerical key but-
|
tons.
Examples:
+ Toassign the 54 minutes, press [+10] button
fifth then press the [4] button.
* Toassign the 90 minutes, press [+10] button
eight then press the [10] button.
When the length of tape corresponds with
the time displayed then the [SIDE A/B] button
should be pressed.
4. Press the [DDRP] button.
(When automatic setting of the recording
level is not required, set the cassette deck to
standby (REC PAUSE) and press the CD
player [PLAY »/t! PAUSE] or (>) button.)
(When the synchro terminals are not con-
nected, once the peak search is completed,
setthe cassette deck to record, and press the
CD
player [PLAY »/il PAUSE]
or (>)
button.)
When the side A music programme
has
terminated,
recording
is automatically
stopped.
If side B is also to be recorded, turn the tape
over and again press the [DDRP] button.
(now recording will start immediately)
(No.20329) 1-13
Advertisement
